Gasboy External Filter Bedienungsanleitung PDF herunterladen (Seite 6)

Installation of the Kit

Gasboy

is a registered trademark of Gilbarco Inc. UL

is a registered trademark of Underwriters Laboratories Inc.

7300 West Friendly Avenue · Post Office Box 22087

Greensboro, North Carolina 27420

Phone 1-800-444-5529 · http://www.gasboy.com · Printed in the U.S.A.

MDE-4528A Gasboy® External Filter Kit Installation Instructions · November 2007

9 Install assembly from steps 6 through 8 to 45° elbow (P/N 024877) installed in step 5.

10 Install the filter elements (not shown in Figure 1 on page 5) to filter adapter (P/N 025903).

Notes:1) Standard filter element (P/N 025900) removes particulates only; Hydrosorb filter

element (P/N 25901) removes water and particulates.

2) For operating environments with temperatures below 0° F (-17° C), use the cold

weather blue fluorosilcone filter gaskets.

11 Remove the existing filter from the solenoid valve and filter manifold and replace with filter

cap and gasket (P/N R18896-G1 - not shown).

12 Dispose of any fuel or absorbent material properly.

13 Remove the existing nozzle hook and retain screws.

14 Install the nozzle hook (P/N 003719 - not shown) using screws from step 13.

15 Put the unit into service and check for leaks and proper operation.

1 2 3 4 5 6

Keine Kommentare

Gasboy External Filter Bedienungsanleitung Seite 6