SERIES 1000 FUEL MANAGEMENT SYSTEM CARD ENCODING MANUAL C08924 GASBOY INTERNATIONAL LLC

03/07/03 3-1 Section 3 CARD LAYOUT & FIELD DESCRIPTIONS All Series 1000 cards are encoded with information to control access to the fuel d

GASBOY Series 1000 3-2 03/07/03 LAYOUT FOR STANDARD MAG AND OPTICAL CARDS This section describes the information fields encoded on the cards. Fie

Card Layout & Field Descriptions 03/07/03 3-3 ID Field 1 and ID Field 2 The Series 1000 System can have two variable identification fields who

GASBOY Series 1000 3-4 03/07/03 End Field Separator (Mag Card Only) One field separator is encoded after the last ID field to indicate the end of

Card Layout & Field Descriptions 03/07/03 3-5 Table 3-1. Product Limitation Codes Limitation Code Limit Cutoff Quantity (5 Digits) 0 1 2

GASBOY Series 1000 3-6 03/07/03 Table 3-2 Product Code Assignments Table 3-3. Product Authorization Codes Product Code (2 digits) Description A

Card Layout & Field Descriptions 03/07/03 3-7 Table 3-4. Required Manual Entries Code Required Manual Entries 0 No manual entry required 1

GASBOY Series 1000 3-8 03/07/03 CARD LAYOUT TO MATCH "A" SYSTEM The optical card layout to match a GASBOY "A" System does not

Card Layout & Field Descriptions 03/07/03 3-9 1000 System. These tables should contain the same or similar values as those on your "A&quo

03/07/03 4-1 Section 4 CARD ENCODING FORM The Card Encoding Form on the following page is provided to organize your card data for encoding. Us

GASBOY 1000 SERIES CARD ENCODING FORM CARD TYPE: q SINGLE q DUAL SYSTEM-ID:_____________ SYSTEM OWNER: CARD COLOR:______________

03/07/03 5-1 Section 5 ORDERING ENCODED CARDS FROM GASBOY Encoded cards may be ordered from GASBOY through your GASBOY distributor. The Card E

03/07/03 6-1 Section 6 ENCODING MAG STRIPE CARDS Encoding your own mag stripe cards requires a device capable of encoding ABA Track II. A mag

03/07/03 7-1 Section 7 ENCODING OPTICAL CARDS Information is encoded onto the optical cards by using a special five-bit code. The code is uniq

GASBOY SERIES 1000 FUEL MANAGEMENT SYSTEM CARD ENCODING MANUAL C08924 Rev. 03/07/03 GASBOY INTERNATIONAL LLC LANSDALE, P

GASBOY Series 1000 7-2 03/07/03 Figure 7-1. Optical Card Bit Position Table 7-1. Optical Card, Five-Bit Code Table DECIMAL CODE BITS 0 2,4

Encoding Optical Cards 03/07/03 7-3 CARD PUNCH MACHINE Card punch machines may be purchased from your GASBOY distributor for punching your own car

GASBOY Series 1000 7-4 03/07/03 6. The keyboard of the punch machine is marked 1-5, 1-5, S. As shown in Figure 7-3, the top keys numbered 1-5 are

Encoding Optical Cards 03/07/03 7-5 CARD PUNCHING FORM

GASBOY Series 1000 7-6 03/07/03 CARD PUNCHING EXAMPLE The following is an example of a typical card punching application. The card information be

Encoding Optical Cards 03/07/03 7-7  DIGIT BEING INDEX STEP INSTRUCTIONS PUNCHED COUNTER 1. Insert card into the punch machine (cut corner to

GASBOY Series 1000 7-8 03/07/03 If the card is punched correctly, it should match the card shown below. Figure 7-4. Sample Punched Card

03/07/03 8-1 Section 8 CARD EMBOSSING The cards can be embossed with information (e.g., card number, account number, etc.) to visibly identify

GW01 - 6/04/02 Rev. 1 WARRANTY General Statements: Gasboy International LLC. warrants all new equipment manufactured by Gasboy against defective ma

Copyright 2003 by Gasboy International LLC All rights reserved. The information in this document is confidential and proprietary

03/07/03 Contents-1 CONTENTS Section 1: INTRODUCTION... 1

GASBOY Series 1000 Contents-2 03/07/03 Figures and Tables Figures 7-1. Optical Card Bit Position...

03/07/03 1-1 Section 1 INTRODUCTION Access to the GASBOY Series 1000 System is controlled through the use of specially encoded cards. The GASB

03/07/03 2-1 Section 2 THE CARDS SPECIFICATIONS Card Dimensions: 3 3/8" x 2 1/8" Card Thickness: .032" maximum (Mag Card) .